Features & benefits
- Low surface temperature – no greater than 43°C
- Much smaller than a typical LST radiator
- Twice the heat output of an equivalent sized LST radiator
- Quick heat up
- Good heat distribution
- Simple to install
A special Thermostatic Radiator Valve (TRV) is fitted to the heating coil pipework and a temperature sensor positioned immediately behind the discharge grille. The valve modulates between the open and closed positions carefully maintaining the discharge air temperature, so that surface temperature satisfies LST regulations whilst optimising heat output.
Each Forceflow LST fan convector runs continuously at a single fan speed which is chosen and set by the installer or end user. The unit is supplied as standard with:
- Built-in on/off, fan speed
- Summer/winter rocker switches
- A low water temperature cut-out (T4) thermostat
- An EU3 grade disposable panel filter
- A screw-fixed access panel
- Integral discharge and return air grilles
- A factory set TRV valve, fitted into the heating coil pipework, with discharge temperature sensor
Forceflow LST offers all the benefits of a conventional Forceflow Fan convector, despite having a lower surface temperature, and heat output per metre length is over twice that of an equivalent LST radiator.
Fan Convectors are universally acknowledged to be one of the simplest and most cost-effective ways to heat rooms of all types and sizes.
Its unique sectional configuration ensures compatibility with previous building work. The three sections are delivered separately for ease of handling. Quick and easy to fix together, the H2 Select Fan Convector unit can be secured to virtually any wall and utilises existing apertures, minimising building work.
Online | Privacy policy